Frankenblocks Concept - Part 3

Frankenblocks + Concept

It's time to settle on a specific module size, and decide how a default 'baseplate' should look like.

Frankenblocks Concept - Part 2

Frankenblocks + Concept

We settled on Lego (or the Lego dimensions and stud concept) as the basis for our own STEM system, and I've named the pieces 'Frankenblocks'. A sensible name, as we're building a kind of Frankenstein solution.

Frankenblocks Concept - Part 1

Frankenblocks + Concept

So, I decided to create my own STEM system. Step number one was the decision to adapt and adopt Lego bricks. Step number two was figuring out the concept and sizing.

I got some input from an Internet contact who is a teacher, and I used quite a bit of his experience and insight. (He didn't want to be mentioned, but you still deserve the credit, mister X! We'll call you 'Fred' from now on.)

FB-10046-1 - Plate Flat Scarred - 2x4x1

3D Printing + Frankenblocks

A very simple small flat plate 2x4x1, marked with the 'Frankenblocks' logo. Nothing special, but it had to be done.

You can find the model on Makerworld.

Frankenblocks - Eyeing the Competition

Frankenblocks

How to combine Lego with other bits and pieces, including electronics.

Here are the results of my search for 'competitors' (not really 😁) - or better put - for alternatives, sources, ideas, possibilities.

FB-10043-2 - Baseplate Small Technic No Groove - 8x16

3D Printing + Frankenblocks

This is a Frankenblocks baseplate designed for Lego Technic.

You can find the model on Makerworld.

FB-10042-3 - Baseplate Small Technic Dual Groove - 8x16x2

3D Printing + Frankenblocks

This is a Frankenblocks baseplate designed for Lego Technic.

You can find the model on Makerworld.

FB-10010-5 - Brick - 2x4x3

3D Printing + Frankenblocks

Your most basic Lego compatible building block, the 'Hello World' equivalent in the 3D printing building bricks community.

The model can be found on Makerworld.

Other parts can be found in the Frankenblocks Catalogue.

FB-10035-3 - Baseplate Small Dual Groove - 8x16x2

3D Printing + Frankenblocks

This is the basic building plate I use for my Frankenblocks system.

You can find the model on Makerworld.

A catalogue of all (?) my Frankenblocks can be found here.

FB-10017-2 - Calibration Piece

3D Printing + Frankenblocks

This piece is used in the FB-10000-x Calibration package.

You can find that package on Makerworld.

FB-10000-5 - Calibration Package v5

3D Printing + Frankenblocks

These objects can help you calibrate your printer. This should make it easier to print Lego compatible blocks, such as the Frankenblocks. You can find the files on Makerworld.

For most people it will be enough to print plate 1, play a little with X- and Y-compensation for 'snappiness', and be done with it.

Still want to know more? Read on...

Frankenblocks - Dialing in your printer

3D Printing + Frankenblocks

Combining Lego and 3D printing shows again how much engineering went into those stupid little Lego bricks. I can't print as accurate as their factory produces them, but I have to get as close as I can to make things usable.

See also the Frankenblocks Calibration Package!

Skiddle Skedaddle - Return of the Skiddler... or Frankenbricks? Frankenblocks? Whatever...

3D Printing + Frankenblocks

Skiddle Skedaddle. Return of the Skiddler. Well, arrival of the Skiddler, at least. This is going to be my big 2026 project. After world domination, of course.

(What the hell are Skiddles? Or Frankenbricks?)